Stop Flats, Before they Stop You!

As tested in Rider Magazine!

They put 9 holes in their tires ..... and kept on riding!

3rd Place- 2006 Tecate SCORE Baja 500

Don't Get Stranded, Get Ride-On!

If you own a motorcycle this is a great way to add an extra margin of safety!  You only have 2 Wheels, don't let a blow out or a puncture ruin your day, your vehicle and your trip.  Get Ride-On and be prepared to go out on the road or to wherever you are travelling.

Ride-On TPS has more than 250,000 applications and over five billion miles to attest to its effectiveness. It is currently used by the military, US Postal Service, more than sixty cities, municipalities, government agencies, in more than 4,000 police vehicles, and in thousands of tractors and trailers. More than 25 percent of the nation's top twenty hauling and disposal fleets are now using Ride-On TPS tire sealants (tyre sealants) to help them with their pressure maintenance programs and as a means of reducing their vehicle downtime. Ride-On is available as an OEM item by the nation's largest trailer manufacturers and through six of the fifteen largest commercial tire (tyre) dealers. Ride-On TPS is available in formulations for every tire (tyre) application.

Additional Features:

• Safe to use - Non-flammable, non-hazardous, biodegradable.
• Reduces downtime - Prevents flats and seals multiple punctures up to 1/8” in diameter.
• Helps seal slow leaks that cause tires to deflate over time.
• Will not harm tires and wheels - conditions casings and contains corrosion inhibitors to protect steel, aluminum, and yellow metals from oxidation.
• Water dispersible - Washes out with plain water leaving no residue.
• Suitable for all weather conditions - Specially formulated to prevent freezing at extremely low temperatures (-40 °F) and separation at high temperatures.
• Available in convenient 5-gallon pails and 55-gallon drums.
• Improves fuel economy - Underinflated tires have higher rolling resistance which can result in a loss of fuel economy of  1-2%
• Extends tire life - helps balance tires and helps tires run cooler by eliminating the porosity leaks that lead to underinflated tires.

What Should You Do if You Find a Nail or a Screw in Your Tire?

Inspect your tires regularly for perforating objects or other damage. Look for and remove any stones, bits of glass, metal, or other
foreign objects wedged in the tread – these may work their way deeper into the tire and eventually cause a puncture. Also check your tires closely for signs of uneven wear patterns. Uneven wear may be caused by improper inflation, misalignment, tire imbalance, or damaged suspension parts. If the cause of the uneven wear is not corrected, further tire damage will occur. Certain uneven wear patterns may also indicate that the tire has suffered internal or structural damage; such damage requires immediate attention from a professional tire care specialist.  If you notice that an object has punctured your tire tread, drive your bike for 3-5 miles to warm up the tires. Remove the puncturing object and immediately drive your motorcycle for 2-3 miles, so that Ride-On can work its way into and seal the puncture. Although
Ride-On is effective from -40°F to 250°F, please note that it works best once your tires have warmed up. For maximum safety, have a tire professional inspect (and if necessary, repair or replace) your tire as soon as possible after a puncture. Ride-On will not interfere with the application of conventional tire plug and patch repairs, and can easily be washed out of tires with water. 

You may be wondering why you need to remove puncturing objects from your tire tread, given that Ride-On forms an effective seal around such objects. The reason is that if an object is left in the tire, it will shift as the tire rotates, eventually creating a larger hole and causing further damage to the tire or tube. Please note that if an object has been in the tire for a long time, it may take some time for the puncture cavity to close. (This is because rubber has “memory,” which causes it to conform to the shape of the puncturing object.) In this case, the tire may temporarily lose some air until it is sealed. Note also that if the puncturing object is a screw, you must unscrew it - yanking or pulling the screw will tear the rubber and possibly the steel belts.

Will Ride-On Harm My Wheels or Tires?
Ride-On is designed to be non-hazardous and non-flammable, and contains corrosion inhibitors that protect all alloys of steel,
aluminum, magnesium, and yellow metals against oxidation. Although some of our competitors’ products have been documented as
causing corrosion, Ride-On enjoys a reputation for being completely compatible with all types of wheels and tires. Ride-On is currently sold by six of the nation’s ten largest commercial tire dealers. They install our products into the tires of their commercial customers, who demand that the products not harm their aluminum or steel wheels. As their tires can last upwards of 250,000 miles, the fact that Ride-On is designed to not harm tire ply materials or cause loss of adhesion strength helps those customers retain tires for the fullest life possible. Letters from manufacturers such as Michelin, Goodyear, Bridgestone/Firestone, Continental, Yokohama, and Toyo that indicate that the use of our products do not automatically void their warranties also bears witness to our success in creating a product that does not cause harm to tires or wheels.